In stock
Complete your setup and save when you bundle these popular accessories.
Add a decorative feature to your guttering with these rain chain metal bells 2.5m from The Garden Marketplace. Designed as an attractive alternative to traditional downspouts, the bell-shaped sections guide rainwater down the chain, creating visual interest during wet weather while helping direct run-off away from the gutter. With a copper plated finish, it brings a warm metallic tone that complements conservatories, extensions, porches and garden buildings.
The chain arrives fully assembled for convenience. Installation is intended to be quick and straightforward: remove the existing downspout and insert the fixing bar up through the guttering, allowing you to fit the rain chain in seconds (depending on your gutter access and set-up). Its 2.5m length and approx. 80mm wide bell cups give it a substantial presence without being overbearing.
What’s Included
One fully assembled metal bell rain chain, 2.5m long, supplied with a fixing bar for fitting through the guttering.
Materials/Specs
Metal bell-cup rain chain with a copper plated finish. Fully assembled construction designed to replace a downspout section and guide rainwater down the chain.
Dimensions/Size
Overall length: approximately 2.5m. Bell width: approximately 80mm per bell section.
Care & Use
Ensure the chain is installed securely and directed to an appropriate drainage point. Periodically check the fixing point and alignment, especially after heavy rain or strong winds. Wipe clean if required to remove debris from bell cups and maintain water flow.
Notes/Disclaimers
Rain chains work best where water can drain safely at ground level; you may wish to position a container, water butt or drain beneath the chain. Copper plated finishes will naturally weather over time. Measurements are approximate and may vary slightly.
No specifications available for this product.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.